Basement Waterproofing & Foundation Repair in Rushland

The challenge we faced was trying to find out where the water was coming in.

To address this, we carried out below-grade waterproofing by digging down on the outside and applying tar and membrane.

The challenge we faced was that the dirt crawl space was very uneven.

To address this, we installed a full perimeter system with a sump pump, a complete vapor barrier on the walls, and a full crawl space encapsulation system.

The challenge we faced was that the wall that was leaking was built on a slab. To address this, we built a wall one block high and then installed below-grade waterproofing on the outside.

The challenge we faced was that it was a very uneven crawl space, so we had to dig it out to make it level.

To address this, we first completed foundation stabilization and then installed a drainage system with a full encapsulation system for moisture control. The crawl space turned out beautifully.

The challenge we faced was that it was a tight area to dig, so we had to hand dig everything.

To address this, our Project Manager Ed went out and knew exactly what it would take to get the issue resolved quickly. He proposed an egress escape window and well. The township approved everything, and both the new homeowners and previous clients are happy.

Mr. Miller had baseboard heating around the entire basement, so we had to work around it, which was quite tough.

To address this, we provided a closed full-perimeter drainage system with cleanouts for inspection and maintenance. We also installed a new Grate Sump with a 1/3 HP pump and an airtight lid to protect against radon gases. In addition, we installed an entry wall drain to protect against leaking Bilco doors. Now, after heavy rain, Mr. Miller does not have to pull out the shop vac. Problem solved.