Basement Waterproofing & Foundation Repair in Wycombe

The challenge we faced was that the dirt crawl space was very uneven.

To address this, we installed a full perimeter system with a sump pump, a complete vapor barrier on the walls, and a full crawl space encapsulation system.

The challenge we faced was that the wall that was leaking was built on a slab. To address this, we built a wall one block high and then installed below-grade waterproofing on the outside.

The challenge we faced was that it was a very uneven crawl space, so we had to dig it out to make it level.

To address this, we first completed foundation stabilization and then installed a drainage system with a full encapsulation system for moisture control. The crawl space turned out beautifully.

The challenge we faced was that it was a tight area to dig, so we had to hand dig everything.

To address this, our Project Manager Ed went out and knew exactly what it would take to get the issue resolved quickly. He proposed an egress escape window and well. The township approved everything, and both the new homeowners and previous clients are happy.

The challenge we faced was working around a very sticky sealant on the floor that the homeowner had tried to use to keep water out of the basement.

To address this, we installed our patent Grate-Drain drainage system, which channels groundwater seepage to the Grate Sump. We also installed a vapor barrier behind the finished wall to protect against any future wall leaks. Now the homeowner can refinish her basement.