Basement Waterproofing & Foundation Repair in Middletown

The challenges we faced were the large amount of mud on the floor, bowing walls, a high water table, and the fact that there were no basement windows.

To address this, we first took care of the bowing walls with reinforced wall-stabilizing straps. Then, we handled the water problem with a full perimeter drainage system and two sump locations. We also added seven glass block windows and power-washed the floor down.

The challenge we faced was that this was a commercial building, so we could only work on the job on Saturdays and Sundays.

To address this, Project Manager Steve C. went out and met with the property owner, and the solution he provided was a drainage system on all outside walls along with a full vapor barrier, mold treatment to protect against wall leaks, and a Grate Sump in the low spot. After the job was finished, all the damp smells and odors went away, and now they have zero customer complaints.

The challenge we faced was removing the finished material to access the wall crack that the homeowner did not know was hidden behind the finished wall.

To address this, we offered our maximum protection package, where we sealed the crack from both the inside and the outside. On the outside, we dug all the way down to the footer and applied a rubber membrane and coating. On the inside, we installed our Techni-Crack repair system to ensure the homeowners would not have a problem from this wall crack again. Now they can begin the process of refinishing the damaged finished material in their basement.